Square meters to square feet

Understand the conversion

Convert square meters (m²) to square feet (ft²) with an instant calculator. See the exact formula (ft² = m² × 10.7639104167097) and copy the result. The input is square meters (m²), and the output is square feet (ft²). Both values describe the same underlying quantity; only the unit changes. This distinction matters when a map, product specification, report or calculation uses a different convention from the one you normally read. Comparing numbers before converting their units can lead to a convincing but incorrect conclusion.

Area measures a two-dimensional surface. Square metres and square feet describe room and building surfaces, while hectares and acres are common for plots and farmland. A square unit is not a length unit with a new label: the length conversion factor must be squared when it is applied to an area.

Formula and worked example

Use the formula ft² = m² × 10.7639104167097. The displayed answer is rounded only for readability. Start with a number expressed in square meters (m²) and apply the factor or scale exactly as written. Write square feet (ft²) beside the answer. Carrying the units through the calculation helps you catch a reversed factor: if the units do not cancel in the expected direction, check whether you selected the opposite converter.

The worked example begins with 100 in the input unit and gives 1076.39104167 in the output unit. You can enter a different value above and the result updates immediately. For a manual check, substitute your own number into the formula, keep a few extra digits during the calculation, and round only the final answer.

Where this is useful

Property listings may show square feet instead of square metres. Area uses the square of the length conversion factor, not the length factor itself.

One square foot is exactly 0.09290304 square metre because a foot is exactly 0.3048 metre and area squares that length. Property listings may use either unit. Before comparing prices per unit of area, verify whether each listing includes the same kinds of space, such as garages, balconies or common areas.

Start with square metres from a floor plan and read square feet for an imperial property listing. Convert the area itself, not its side lengths alone.

Use these results to compare property listings, floor plans and land records from different countries. First check whether the source is describing internal floor area, gross building area or an entire parcel. Those are different measurements even if they happen to be expressed in the same unit.

Accuracy and common mistakes

The calculator uses a defined conversion relationship and displays a result rounded to twelve significant digits. That display limit prevents a long tail of floating-point digits from looking like extra measurement accuracy. It does not make an imprecise starting measurement more precise. If a source value has only two or three meaningful digits, report your converted result with comparable precision. Use a decimal point; a comma or space groups thousands. For example, 1,234 means one thousand two hundred thirty-four.

Applying a metres-to-feet factor directly to square metres gives the wrong area. The factor must account for both dimensions of the surface. Also, an acre and a hectare are both area units but have different sizes; do not use one as a generic synonym for the other.

Frequently asked questions

Why does the area number change by more than the corresponding length number? Area combines two lengths. A change of unit therefore acts on both dimensions, so its multiplier is the square of the linear multiplier.

How can you check the direction? Read the input and output unit labels before entering the number, then compare the answer with an order-of-magnitude estimate. A reverse conversion should return approximately the starting value; a small difference can come from rounding. For decisions that depend on a legal or engineering tolerance, confirm the source unit and its stated precision first.